We do a lot of rusty iron roof restoration, often involving replacement of sheets,but sometimes all that’s needed is a bit of TLC.
The roof pictured below, although an eyesore, was found to be in reasonable condition, so we set about preparing it for painting.
Cleaning & Rust Conversion
We firstly disconnected the down pipes to ensure no chemicals or waste water entered the tank. It’s also important to ensure no waste water enters the general drainage system. This is done by damming up the street gutters and pumping the waste back to a suitable area on the property.
In this instance we treated the roof with a chemical mixture which converted the rust to something approaching bare metal.
This was followed by fixing new fasteners where required, then water blasting to provide a solid key for paint to adhere to the surface.
Etch Priming
No rusty iron roof restoration should be attempted without the application of a decent etch primer. Here we used a quality acrylic primer.
Whereas the first photo was taken looking up the roof from the water tank, this one was taken looking down towards the tank.
Topcoats Applied
Finally with two coats of ten year warranted acrylic coating our rusty iron roof restoration is complete.
So, whether you’re selling or just wanting to improve appearances…why not give us a call.
We’re good at high pressure cleaning… not high pressure selling – like some in the industry.
Remember if you don’t have insulation installed you can take a short cut by speaking to us about affordable NuTech NXT Coolzone. This product makes a remarkable difference to the inside temperature during the hot summer months.
Yes were based in The Gap and have painted lots of roofs in the The Gap and surrounding suburbs. Occasionally we venture as far North as Bribie Island and half way to the Gold Coast in the South plus Beaudesert in the South West.
Call 3300 6100 or speak to Kevin direct on his mobile 0418 733 068 for a obligation free quote.